I have bomag with duetz 2 cylinder diesel. The engine will not turn over and it has sheared off the four bolts on the flywheel. Does this indicate that crankshaft is gone
↧
Bomag aw120 roller
↧
Cat CB-534D won't move
Hey guys, this is my first post. I am a heavy duty mechanic and I'm wondering if any body has had this problem. A operator came up to me andsaid that the machine won't move and the parking lite is flashing. For some strange reason it looks like code. It flashes 1 long too short when I Ford or reverse, it flashes 5 long too shortI don't have sis unfortunately I have a wiring schematic I've taking off dump valve solenoid brake release solenoid brake valve solenoid propel forward and back solenoid tested all continuity and functions. All seems ok. Any help would be appreciated.
↧
↧
Cp563e won't vib on low
Hi all I have a cat cp563E and having problem with low vib. It will kick in when cold but when machine warms up it won't! Maybe only few times. High side works fine
I've checked charge pressure that's ok. I checked for pressure on the servo ports it pressures up when I hit the button but doesn't vib?? The solenoid vales have been changed btw
I've been told could be case pressure or servo problem
Any help would be greatly appreciated
Regards Michael.
I've checked charge pressure that's ok. I checked for pressure on the servo ports it pressures up when I hit the button but doesn't vib?? The solenoid vales have been changed btw
I've been told could be case pressure or servo problem
Any help would be greatly appreciated
Regards Michael.
↧
Newbie. Pitch asphalt to drain
Hey Folks, Newbie here. Please don't aim for my head immediately. Need to roll a 25' x 40' section of an existing parking lot with asphalt. We need to pitch it towards the drain. We have compacted the earth. We plan on 1.5" stone, compacted as well. Where do I create the pitch? With the 1.5" stone or with the asphalt?
I was told to use 3" base, 2" binder, 2" top coat from our asphalt vendor. ALL help appreciated.
We'll have a rented 3-5 ton double roller.
I was told to use 3" base, 2" binder, 2" top coat from our asphalt vendor. ALL help appreciated.
We'll have a rented 3-5 ton double roller.
↧
Corinsa CCH 7.21 PTR
Can anyone guide me what is the price of new Corinsa CCH 7.21 pneumatic roller?
↧
↧
Hydraulic Problem, Drum not turning with wheels
I have a Sakai SV70D, It has been a great roller until recently it decided it doesn't want to leave the shop.
It was about 10*f here when I fired it up and broke it free from its resting spot and loaded up on a the icy trailer with no problems whatsoever. Sometimes it likes to move when idling in Neutral so I also put the gear selector in neutral while I chained it down and drove a couple miles to the shop. Once there I changed the engine oil and looked over everything. It was in the shop for about a week.
I finally decided to bring it back to the yard so I took the semi to load it up. I fired it up and tried to load it on the trailer and it would not climb the ramps, the back tires will spin out but the drum does not turn with power. I then drove it up and down the street in forward and reverse, 1st and 2nd gear, vibrating High and Low. Everything works as it should I just don't have power to the drum?
So I put it in 2nd gear and ran up on an inclined snowbank and I could get the drum to take off spinning like it should but the wheels then stop turning, I then repeated this in reverse for the same effect. Once I stopped and started again the wheels would begin spinning but no drum. I was unable to get the drum to spin in 1st gear.
It sounds as simple as a priority valve or some sort of sticky valve malfunctioning but the lines that come off the main hydraulic pump go down to the rear axle motor and simply "tees" off of that motor and goes directly to the drum motor. So whatever the wheels are getting the drum is getting as well.
I then brought it back inside and jacked it off the ground and tried forward and reverse and everything (wheels and drum) spun normally. I then lowered the drum to the ground and it does not have enough power to spin the drum.
I then thought that maybe it had picked something up in the tank suction so I drained the Hyd. tank and the screen/filter is perfect. My next thought was maybe the inlet or outlet filter caught some water and swelled up causing a restriction?
New filters are on order although I did just change them 130 hrs ago. I am really grasping at straws now so and ideas are appreciated, Thanks!
It was about 10*f here when I fired it up and broke it free from its resting spot and loaded up on a the icy trailer with no problems whatsoever. Sometimes it likes to move when idling in Neutral so I also put the gear selector in neutral while I chained it down and drove a couple miles to the shop. Once there I changed the engine oil and looked over everything. It was in the shop for about a week.
I finally decided to bring it back to the yard so I took the semi to load it up. I fired it up and tried to load it on the trailer and it would not climb the ramps, the back tires will spin out but the drum does not turn with power. I then drove it up and down the street in forward and reverse, 1st and 2nd gear, vibrating High and Low. Everything works as it should I just don't have power to the drum?
So I put it in 2nd gear and ran up on an inclined snowbank and I could get the drum to take off spinning like it should but the wheels then stop turning, I then repeated this in reverse for the same effect. Once I stopped and started again the wheels would begin spinning but no drum. I was unable to get the drum to spin in 1st gear.
It sounds as simple as a priority valve or some sort of sticky valve malfunctioning but the lines that come off the main hydraulic pump go down to the rear axle motor and simply "tees" off of that motor and goes directly to the drum motor. So whatever the wheels are getting the drum is getting as well.
I then brought it back inside and jacked it off the ground and tried forward and reverse and everything (wheels and drum) spun normally. I then lowered the drum to the ground and it does not have enough power to spin the drum.
I then thought that maybe it had picked something up in the tank suction so I drained the Hyd. tank and the screen/filter is perfect. My next thought was maybe the inlet or outlet filter caught some water and swelled up causing a restriction?
New filters are on order although I did just change them 130 hrs ago. I am really grasping at straws now so and ideas are appreciated, Thanks!
↧
Bomag BW141AD-2 not Travelling
hi all,
I have recently acquire a Bomag BW141AD-2 Tandem Double Drum Roller.
the machine does not travel.
vibration and other functions is ok except the travel.
the hand brake release is already check.
im suspecting that this is an electrical problem.
any input is a big help.
regards
I have recently acquire a Bomag BW141AD-2 Tandem Double Drum Roller.
the machine does not travel.
vibration and other functions is ok except the travel.
the hand brake release is already check.
im suspecting that this is an electrical problem.
any input is a big help.
regards
↧
Tampo 16D
I have a Tampo 16 D single drum roller. I am having electrical problems on the forward and reverse. Does anyone have a wiring diagram or ideas that could help. The controller has been changed out but not shore that it was re wired proper.
↧
Dynapac shell kit on a Bomag BW213
Does anyone know if a Dynapac padfoot shell kit will fit on a Bomag BW213? Both are 84" and the drum on the Bomag has a 59.1" diameter. Help appreciated.
↧
↧
research serial number ?
How do I research a serial number to know what year Bomag 120 AD I have ? Plus, is there a download available for a service manual ?
Thanks
Thanks
↧
Found old Roller on Maui
On vacation here so can't really search :)
Was driving the Road to Hana and once on the south side I saw this not too far off the side of the road.
Sorry if its been posted before, if anything this will let you all know its still there.
Any clue what it is?![Name: IMG_20150508_152314025_HDR.jpg
Views: 67
Size: 46.1 KB]()
![Name: IMG_20150508_152248495.jpg
Views: 62
Size: 43.8 KB]()
![Name: IMG_20150508_152238885_HDR.jpg
Views: 66
Size: 51.9 KB]()
![Name: IMG_20150508_152259189_HDR.jpg
Views: 63
Size: 56.4 KB]()
Was driving the Road to Hana and once on the south side I saw this not too far off the side of the road.
Sorry if its been posted before, if anything this will let you all know its still there.
Any clue what it is?
↧
Problem with benford tv1200
Hey Guys,
I am new to the forum and i was hoping someone out there could help!
I am currently working on a benford tv1200 roller which fell from a flatbed and ended up oiled up.
It has sat for 12 months prior to me starting the company and now has no fuel flow from the left injector pump.
I have swapped the pumps over confirming both pumps are functioning, there is also good fuel flow to both pumps.
I have also checked the cup under the pump which actuates it, this moves on cranking also.
Any ideas will be appeciated!
Thanks!
I am new to the forum and i was hoping someone out there could help!
I am currently working on a benford tv1200 roller which fell from a flatbed and ended up oiled up.
It has sat for 12 months prior to me starting the company and now has no fuel flow from the left injector pump.
I have swapped the pumps over confirming both pumps are functioning, there is also good fuel flow to both pumps.
I have also checked the cup under the pump which actuates it, this moves on cranking also.
Any ideas will be appeciated!
Thanks!
↧
Dynapac lp650 with hatz diesel problems
I'm working on a mid 90s Dynapac walk behind double drum roller. Has a hatz e780 single cyl diesel.
The engine start easy with no smoke, but will not hold an idle, and has no throttle response what so ever. Will slowly rev up and down and eventually die. With no smoke.
I suspect a rod knock but am not familiar with this machine so I'm not sure how knocky they are supposed to be..
Would a loose rod cause this strange throttle control or should I be digging into the fuel system? The filters are clean and the fuel is new.
Any ideas?
Also who's good for parts?
Thanks for any help!
Chris
The engine start easy with no smoke, but will not hold an idle, and has no throttle response what so ever. Will slowly rev up and down and eventually die. With no smoke.
I suspect a rod knock but am not familiar with this machine so I'm not sure how knocky they are supposed to be..
Would a loose rod cause this strange throttle control or should I be digging into the fuel system? The filters are clean and the fuel is new.
Any ideas?
Also who's good for parts?
Thanks for any help!
Chris
↧
↧
IR SD100D won't start
I have an Ingersoll Rand SD100D with ECM. It keeps cutting out and seems the problem is fuel related. Tried all sorts of fixes, are there any electronic issue that anyone knows about with this machine at the engine management control unit or sensors to check???
↧
Chopper Roller?
Can someone tell me where to buy a Chopper Roller for clearing land? It would be going to Mexico.
↧
Bleeding fuel system on Cat CS 563D
Hello all
Hope you're well. I don't know if anyone can help me on this one but I thought I'd give it a try.
Today we had our Cat CS 563D roller S/N CATCS563C2RZ00534 run out of fuel, I unfortunately have no operations manual and cannot for the life of me work out how to bleed the fuel system on it. There is no fuel priming pump on it any where and the fuel filters have a bizzare arrangement of one is mounted directly up side down above the other, it's a very strange system on it. It's a 3116 engine.
Thanks Steve
Hope you're well. I don't know if anyone can help me on this one but I thought I'd give it a try.
Today we had our Cat CS 563D roller S/N CATCS563C2RZ00534 run out of fuel, I unfortunately have no operations manual and cannot for the life of me work out how to bleed the fuel system on it. There is no fuel priming pump on it any where and the fuel filters have a bizzare arrangement of one is mounted directly up side down above the other, it's a very strange system on it. It's a 3116 engine.
Thanks Steve
↧
CA25 Dynapac Soil Compactor
Hello all
Hope you're well. I don't know if anyone can help me on this one but I thought I'd give it a try.
Is there anyone who have CA25 Dynapac shop manual's ? or knows how can i find one of it ?
Thanks Vawhid
Hope you're well. I don't know if anyone can help me on this one but I thought I'd give it a try.
Is there anyone who have CA25 Dynapac shop manual's ? or knows how can i find one of it ?
Thanks Vawhid
↧
↧
CA25 Dynapac Soil Compactor
Hi All
Hope you're well. I don't know if anyone can help me on this one but I thought I'd give it a try.
I want to buy hydraulic pumps for CA25 Dynapac soil compactor from Danfoss but it need some information that i don't have.
Is there anyone who knows product number of this pump in Danfoss catalog?
Thanks Vawhid
Hope you're well. I don't know if anyone can help me on this one but I thought I'd give it a try.
I want to buy hydraulic pumps for CA25 Dynapac soil compactor from Danfoss but it need some information that i don't have.
Is there anyone who knows product number of this pump in Danfoss catalog?
Thanks Vawhid
↧
Stone Wolfpac 3100 issues
Hi Guys, I have a little stone wolfpac 3100 with a honda motor. It runs great for a few minutes, then it acts like it is starving for fuel. We've changed the filter, and cleaned the carb. Also drained the tank and got a bunch of crap out of it. When it starts to mess up, letting it set for a few minutes seems to help, then it will go again. Also, occasionally it seems like engaging the vibrator will cause it to mess up.
Any ideas?
Thanks!
Any ideas?
Thanks!
↧
small paver with hydraulic steer problems
I have a small paver which I put on a rebuilt hydraulic pump. The steering wheel now, when running spins clockwise and will not stop. Is there an adjustment to correct thid
↧